Ajouté à votre panier
IKA H 29 Cuve à huile, 1L
€285,00
Ajouté à votre panier
IKA TRIKA 55 (5 PK)
€41,00
Ajouté à votre panier
IkaFLON 50 power (5 PK)
€63,50
Ajouté à votre panier
IKA HG 600 Enveloppe chauffante
€141,00
Ajouté à votre panier
IKA H 135.25 Flask carrier 250 ml without handle
€202,00
Ajouté à votre panier
IKA RS 2 Set of magnetic stirring bars
€167,00
Ajouté à votre panier
IKA H 135.401 Flask inlay 500 ml
€159,00
Ajouté à votre panier
IKA H 135.40 Flask carrier 1000 ml without handle
€271,00
Ajouté à votre panier
IkaFLON 30 ellipse (5 PK)
€36,00
Ajouté à votre panier
IKA TRIKA 25 (5 PK)
€16,50
Ajouté à votre panier
IKA H 135.41 Flask carrier 1000 ml with handle
€416,00
Ajouté à votre panier
IKA H 44 Noix de serrage
€37,80
Ajouté à votre panier
IkaFLON 10 cross (5 PK)
€19,00
Ajouté à votre panier
IkaFLON 25 cross (5 PK)
€31,00
Ajouté à votre panier
IkaFLON 38 cross (5 PK)
€48,00
Ajouté à votre panier
IKA H 135.302 Flask inlay 250 ml
€89,50
Ajouté à votre panier
IkaFLON 40 ellipse (5 PK)
€56,00
Ajouté à votre panier
IKA H 135.20 Flask carrier 100 ml without handle
€159,00
Ajouté à votre panier
IKA H 135.101 Block 16 x 4 ml
€89,50
Ajouté à votre panier
IKA TRIKA 35 (5 PK)
€28,00
Ajouté à votre panier
IkaFLON 40 slide round (5 PK)
€29,00
Ajouté à votre panier
IKA PT 1000.70 Sonde de température, avec gaine de verre
€186,00
Ajouté à votre panier
IkaFLON 20 power (5 PK)
€36,00
Ajouté à votre panier
IKA H 135.301 Flask inlay 100 ml
€89,50
Ajouté à votre panier
IkaFLON 10 round (5 PK)
€11,10
Ajouté à votre panier
IKA H 135.30 Flask carrier 500 ml without handle
€217,00
Ajouté à votre panier
IKA H 135.501 Flask inlay 1000 ml
€229,00
Ajouté à votre panier
IKA H 135.203 Flask inlay 50 ml
€89,50
Ajouté à votre panier
IkaFLON 25 glass round (5 PK)
€36,00
Ajouté à votre panier
IKA H 135.201 Flask inlay 10 ml
€89,50
Ajouté à votre panier
IkaFLON 30 slide round (5 PK)
€15,00
Ajouté à votre panier
IkaFLON 20 cross (5 PK)
€28,00
Ajouté à votre panier
IkaFLON 25 round (5 PK)
€17,80
Ajouté à votre panier
IkaFLON 80 round (5 PK)
€52,50
Ajouté à votre panier
IKA H 135.105 Block 4 x 30 ml
€89,50
Ajouté à votre panier
IKA PT 1000.90 Sonde de température, recouverte
€239,00
Ajouté à votre panier
IKA H 135.31 Flask carrier 500 ml with handle
€357,00
Ajouté à votre panier
IkaFLON 25 ellipse (5 PK)
€28,00
Ajouté à votre panier
IkaFLON 20 round (5 PK)
€15,00
Ajouté à votre panier
IKA H 1000
€481,00
Ajouté à votre panier
IKA H 135.107 Block 100 ml
€89,50
Ajouté à votre panier
IKA H 30 Cuve à huile, 1.5L
€315,00
Ajouté à votre panier
IkaFLON 25 slide round (5 PK)
€15,00
Ajouté à votre panier
IKA H 135.11 Square carrier with handle
€331,00
Ajouté à votre panier
IKA H 135.21 Flask carrier 100 ml with handle
€302,00
Ajouté à votre panier
IKA H 135.106 Block 4 x 40 ml
€89,50
Ajouté à votre panier
IkaFLON 35 ellipse (5 PK)
€44,50
Ajouté à votre panier
IkaFLON 37 bone (5 PK)
€69,50
Ajouté à votre panier
IKA TRIKA 80 (5 PK)
€57,00
Ajouté à votre panier
IkaFLON 74 beaker
€396,00
Ajouté à votre panier
IkaFLON 20 ellipse (5 PK)
€24,50
Ajouté à votre panier
IkaFLON 50 slide round (5 PK)
€32,00
Ajouté à votre panier
IKA RS 1 Jeu de barreaux aimantés
€146,00
Ajouté à votre panier
IKA H 135.51 Flask carrier 2000 ml with handle
€515,00
Ajouté à votre panier
IkaFLON 50 round (5 PK)
€21,00
Ajouté à votre panier
IkaFLON 30 round (5 PK)
€17,80
Ajouté à votre panier
IKA H 135.26 Flask carrier 250 ml with handle
€345,00
Ajouté à votre panier
IKA H 135.103 Block 9 x 16 ml
€89,50
Ajouté à votre panier
IKA H 3000
€509,00
Ajouté à votre panier
IkaFLON 54 bone (5 PK)
€84,00
Ajouté à votre panier
IKA H 5000
€599,00
Ajouté à votre panier
IKA H 1500
€496,00
Ajouté à votre panier
IkaFLON 9 crown (5 PK)
€16,50
Ajouté à votre panier
IkaFLON 40 round (5 PK)
€19,00
Ajouté à votre panier
IKA H 135.10 Square carrier without handle
€186,00
Ajouté à votre panier
IKA PT 1000.60 Sonde de température
€169,00
Ajouté à votre panier
IKA H 135.50 Flask carrier 2000 ml without handle
€373,00
Ajouté à votre panier
IkaFLON 15 round (5 PK)
€12,40
Ajouté à votre panier
IKA H 135.102 Block 16 x 8 ml
€89,50
Ajouté à votre panier
IKA HG 1000 Enveloppe chauffante
€168,00
Ajouté à votre panier
IkaFLON 30 cross (5 PK)
€39,00
Ajouté à votre panier
IKA H 135.108 Block 250 ml
€89,50
Ajouté à votre panier
IkaFLON 70 ellipse (5 PK)
€135,00
Ajouté à votre panier
IkaFLON 50 ellipse (5 PK)
€78,50
Ajouté à votre panier
IkaFLON 40 glass round (5 PK)
€36,00
Ajouté à votre panier
IKA H 135.104 Block 4 x 20 ml
€89,50
Ajouté à votre panier
IkaFLON 30 power (5 PK)
€52,50
Ajouté à votre panier
IKA H 135.202 Flask inlay 25 ml
€89,50
Ajouté à votre panier
IkaFLON 50 glass round (5 PK)
€38,00
Ajouté à votre panier
IKA Agitateur magnétique RCT basic
€898,00
Ajouté à votre panier
IKA RCT basic Synthesis Solution 250 Agitateur magnétique
€1.333,00
Ajouté à votre panier
IKA RCT basic Agitateur magnétique
€820,00
Ajouté à votre panier
IKA RCT basic ETS-D 5 Solution Agitateur magnétique
€1.224,49
Ajouté à votre panier
IKA RCT basic Synthesis Solution 1000 Agitateur magnétique
€1.412,00
Ajouté à votre panier
IKA RCT basic Synthesis Solution 500 Agitateur magnétique
€1.351,00
Ajouté à votre panier
IKA RCT basic ready-to-go Solution Agitateur magnétique
€893,63
IKA Agitateur magnétique RCT basic anodized
The new Benchmark for Laboratory Safety and Efficiency
The new RCT basic magnetic stirrer sets a new industry standard: currently the smallest magnetic stirrer with a heating capacity of 800 W, it combines uncompromising safety, exceptional robustness, and maximum efficiency with intuitive and easy handling
The high IP54 protection class and the solid die-cast aluminum housing reliably protect the device from liquids, aggressive vapors, and mechanical influences – for trouble-free continuous operation even under harsh laboratory conditions
The compact design (only 160 x 200 x 100 mm) saves valuable space in the fume hood, fits on almost any laboratory lifting platform, and enables flexible, parallel test setups
This means users benefit from greater safety, greater efficiency, and more freedom in their everyday laboratory work
Made in Germany: RCT is manufactured in Germany in a fully automated production facility using state-of-the-art robot systems. This guarantees the highest quality and absolute reliability for maximum safety and a long service life
The high-quality anodized coating of the heating plate provides reliable protection against scratches and a wide range of chemicals. This means that the heating plate remains in perfect condition, both visually and functionally, even after prolonged use. The aluminum substrate ensures homogeneous temperature distribution and rapid energy transfer to the sample vessel
For the first time, the RCT basic comes with integrated menu functionality, which significantly expands the range of functions— for example with timer functionality. This also enables the integration of wireless temperature sensors (USB-dongle required, available as accessory)
The freely programmable timer starts either immediately or after the target temperature has been reached and signals the end of the process with an acoustic signal. You decide whether the heating and/or stirring should be switched off
The brushless EC motor and high-quality magnets ensure excellent magnetic coupling at up to 1500 rpm. The insulated and thus energy-optimized heating plate has an output of 800 W and enables heating rates of up to 9 K/min. The heating rate can be adjusted in four stages – for slow, gentle, or fast heating depending on the application
For decades, IKA has followed the approach that the safety temperature specified by the user must be set consciously and independently of setpoints using a tool. A new feature is the monitoring of the medium temperature
IKA is thus one of the few manufacturers that not only fully complies with the EN IEC 61010-2-010 laboratory equipment standard for heated devices, but even exceeds it in many respects. Safety is not only certified by a CE declaration, but also independently tested and certified by TÜV Süd according to the internationally recognized NRTL standard – the same safety standard followed by UL and CSA
The customizable 14-segment glass display gives the user complete freedom: you decide which parameters are relevant for your application and can display them permanently – whether speed, temperature, pH value, or timer. In combination with the PT.Wireless and ETS-D7 wireless sensors, the RCT/RET even becomes a fully-fledged pH meter. This saves space, reduces investment, and simplifies the test setup
IKA takes safety to a new level – beyond pure device safety. In addition to the option of monitoring and controlling the RCT via software (e.g. IKA Labworldsoft®) via the integrated RS232 or USB interface (communication via ASCII-based commands (Namur standard)), direct communication with IKA devices, e.g. the overhead stirrers (EUROSTAR), is now possible
This can be a decisive safety advantage when tempering and mixing viscous samples using the RCT as a pure heating plate, enabling unmonitored 24/7 operation. In this case, the RCT automatically detects when the stirring speed of the stirrer falls below a critical value and switches off the heating in this case. This actively protects not only the individual device, but the entire test setup
The new IKA RCT basic offers a sophisticated, multi-level safety concept, innovative operation, and maximum flexibility—all with minimal space requirements and maximum "Made in Germany" quality. IKA takes safety one step further: intelligent networking and digitalization make not only individual devices but entire laboratory processes safer, more efficient, and more future-proof
Independent safety circuit according to EN IEC 61010-2-010: Two separate temperature sensors under the heating plate: one regulates the set temperature, the second monitors an individually adjustable safety limit (e.g. flash point). The setting is made mechanically directly on the device – independently of the process setpoint. This ensures maximum safety even with flammable liquids and in the worst-case scenario (e.g. broken glass)
Monitoring the temperature in the medium with the Delta-T safety function: A definable temperature difference to the medium setpoint ensures that if this is exceeded (due to an unexpected reaction or external heat source), the heating is switched off until restart (stirring remains active). This allows safe approach to critical temperatures without risking shutdown due to slight overshoots
Detection of sudden temperature drops: The RCT detects sudden drops in medium temperature (e.g. due to glass breakage or evaporation of the medium) and can—depending on the setting—switch off the heating permanently
Detection of failure to increase temperature: If no temperature increase is detected despite the energy supply ( e.g. incorrectly positioned sensor), the device automatically deactivates the heating
Dual sensors for medium and carrier medium: Up to two temperature sensors (wired and wireless) can be connected – for redundant or spatially differentiated monitoring, e.g. of a carrier medium
Temperature limits for medium and carrier: Hard temperature limits for medium and carrier medium can be set in the software to prevent operating errors and dangerous conditions
Warning of hot surface (>
50 °C): A visual warning signals when the heating plate is hot—even when the device is switched off. This provides reliable protection against burns
Combination with IKA contact thermometer (ETS-D5): Combining with the ETS-D5 contact thermometer creates an additional, independent safety circuit. This also results in even better measurement accuracy and a clear display at the measuring point
Combination with IKA wireless temperature sensors PT.Wireless and ETS-D7: The elimination of cables significantly reduces the risk of cable breakage and makes the entire test setup clearer and tidier (accessories required)
Networked safety through communication with other IKA devices: The RCT can communicate directly with IKA overhead stirrers (via interface or wirelessly). If the speed falls below a freely definable critical stirring speed, the device automatically switches off the heating. This ensures the safety of the entire test setup – not just that of the individual device
Safe monitoring in the laboratory with the IKA Lab Assistant (app) – coming soon: The IKA Lab Assistant enables wireless monitoring within the laboratory – for maximum flexibility and control (accessories required)
"Always Stir" – stirring remains active in the event of a fault: In the event of errors or safety shutdowns, the stirring function remains active to prevent boiling delays and hot spots
Robust, closed design (IP54) &
die-cast aluminum housing: The almost completely enclosed housing is resistant to aggressive vapors and liquids. The aluminum ensures durability and mechanical safety
Mechanical safety &
construction: Two mounting points for tripod rods enable flexible, stable sensor and structure fixation without additional clamps
Operating modes with access protection: The behavior after power-up and access to setpoints can be specifically restricted to prevent unintentional status changes—for maximum process reliability and ease of use
The new Benchmark for Laboratory Safety and Efficiency
The new RCT basic magnetic stirrer sets a new industry standard: currently the smallest magnetic stirrer with a heating capacity of 800 W, it combines uncompromising safety, exceptional robustness, and maximum efficiency with intuitive and easy handling
The high IP54 protection class and the solid die-cast aluminum housing reliably protect the device from liquids, aggressive vapors, and mechanical influences – for trouble-free continuous operation even under harsh laboratory conditions
The compact design (only 160 x 200 x 100 mm) saves valuable space in the fume hood, fits on almost any laboratory lifting platform, and enables flexible, parallel test setups
This means users benefit from greater safety, greater efficiency, and more freedom in their everyday laboratory work
Made in Germany: RCT is manufactured in Germany in a fully automated production facility using state-of-the-art robot systems. This guarantees the highest quality and absolute reliability for maximum safety and a long service life
The high-quality anodized coating of the heating plate provides reliable protection against scratches and a wide range of chemicals. This means that the heating plate remains in perfect condition, both visually and functionally, even after prolonged use. The aluminum substrate ensures homogeneous temperature distribution and rapid energy transfer to the sample vessel
For the first time, the RCT basic comes with integrated menu functionality, which significantly expands the range of functions— for example with timer functionality. This also enables the integration of wireless temperature sensors (USB-dongle required, available as accessory)
The freely programmable timer starts either immediately or after the target temperature has been reached and signals the end of the process with an acoustic signal. You decide whether the heating and/or stirring should be switched off
The brushless EC motor and high-quality magnets ensure excellent magnetic coupling at up to 1500 rpm. The insulated and thus energy-optimized heating plate has an output of 800 W and enables heating rates of up to 9 K/min. The heating rate can be adjusted in four stages – for slow, gentle, or fast heating depending on the application
For decades, IKA has followed the approach that the safety temperature specified by the user must be set consciously and independently of setpoints using a tool. A new feature is the monitoring of the medium temperature
IKA is thus one of the few manufacturers that not only fully complies with the EN IEC 61010-2-010 laboratory equipment standard for heated devices, but even exceeds it in many respects. Safety is not only certified by a CE declaration, but also independently tested and certified by TÜV Süd according to the internationally recognized NRTL standard – the same safety standard followed by UL and CSA
The customizable 14-segment glass display gives the user complete freedom: you decide which parameters are relevant for your application and can display them permanently – whether speed, temperature, pH value, or timer. In combination with the PT.Wireless and ETS-D7 wireless sensors, the RCT/RET even becomes a fully-fledged pH meter. This saves space, reduces investment, and simplifies the test setup
IKA takes safety to a new level – beyond pure device safety. In addition to the option of monitoring and controlling the RCT via software (e.g. IKA Labworldsoft®) via the integrated RS232 or USB interface (communication via ASCII-based commands (Namur standard)), direct communication with IKA devices, e.g. the overhead stirrers (EUROSTAR), is now possible
This can be a decisive safety advantage when tempering and mixing viscous samples using the RCT as a pure heating plate, enabling unmonitored 24/7 operation. In this case, the RCT automatically detects when the stirring speed of the stirrer falls below a critical value and switches off the heating in this case. This actively protects not only the individual device, but the entire test setup
The new IKA RCT basic offers a sophisticated, multi-level safety concept, innovative operation, and maximum flexibility—all with minimal space requirements and maximum "Made in Germany" quality. IKA takes safety one step further: intelligent networking and digitalization make not only individual devices but entire laboratory processes safer, more efficient, and more future-proof
Independent safety circuit according to EN IEC 61010-2-010: Two separate temperature sensors under the heating plate: one regulates the set temperature, the second monitors an individually adjustable safety limit (e.g. flash point). The setting is made mechanically directly on the device – independently of the process setpoint. This ensures maximum safety even with flammable liquids and in the worst-case scenario (e.g. broken glass)
Monitoring the temperature in the medium with the Delta-T safety function: A definable temperature difference to the medium setpoint ensures that if this is exceeded (due to an unexpected reaction or external heat source), the heating is switched off until restart (stirring remains active). This allows safe approach to critical temperatures without risking shutdown due to slight overshoots
Detection of sudden temperature drops: The RCT detects sudden drops in medium temperature (e.g. due to glass breakage or evaporation of the medium) and can—depending on the setting—switch off the heating permanently
Detection of failure to increase temperature: If no temperature increase is detected despite the energy supply ( e.g. incorrectly positioned sensor), the device automatically deactivates the heating
Dual sensors for medium and carrier medium: Up to two temperature sensors (wired and wireless) can be connected – for redundant or spatially differentiated monitoring, e.g. of a carrier medium
Temperature limits for medium and carrier: Hard temperature limits for medium and carrier medium can be set in the software to prevent operating errors and dangerous conditions
Warning of hot surface (>
50 °C): A visual warning signals when the heating plate is hot—even when the device is switched off. This provides reliable protection against burns
Combination with IKA contact thermometer (ETS-D5): Combining with the ETS-D5 contact thermometer creates an additional, independent safety circuit. This also results in even better measurement accuracy and a clear display at the measuring point
Combination with IKA wireless temperature sensors PT.Wireless and ETS-D7: The elimination of cables significantly reduces the risk of cable breakage and makes the entire test setup clearer and tidier (accessories required)
Networked safety through communication with other IKA devices: The RCT can communicate directly with IKA overhead stirrers (via interface or wirelessly). If the speed falls below a freely definable critical stirring speed, the device automatically switches off the heating. This ensures the safety of the entire test setup – not just that of the individual device
Safe monitoring in the laboratory with the IKA Lab Assistant (app) – coming soon: The IKA Lab Assistant enables wireless monitoring within the laboratory – for maximum flexibility and control (accessories required)
"Always Stir" – stirring remains active in the event of a fault: In the event of errors or safety shutdowns, the stirring function remains active to prevent boiling delays and hot spots
Robust, closed design (IP54) &
die-cast aluminum housing: The almost completely enclosed housing is resistant to aggressive vapors and liquids. The aluminum ensures durability and mechanical safety
Mechanical safety &
construction: Two mounting points for tripod rods enable flexible, stable sensor and structure fixation without additional clamps
Operating modes with access protection: The behavior after power-up and access to setpoints can be specifically restricted to prevent unintentional status changes—for maximum process reliability and ease of use
Accessoires
Série
FAQ
Vous avez des questions sur ce produit ou cette catégorie ? Dans notre section FAQ, nous répondons aux questions les plus fréquemment posées !
Voir FAQVous pouvez toujours contacter nos experts via info@imlab.eu
Ou appelez-nous directement sur +33 (0)3 20 55 19 11
(Jours ouvrables de 08h00 à 17h00)
Posez votre question
« * » indique les champs nécessaires
Produits similaires
Catégories populaires
Nos services - plus qu'un simple webshop
Chez Imlab, vous n’achetez pas seulement un produit, vous choisissez un partenaire fiable avec une équipe à votre service.
Pas de robots, pas de centre d’appels, mais des spécialistes expérimentés qui vous aident.
Nos services comprennent :
- Étalonnage de votre équipement de mesure
- Installation sur site
- Réparations et maintenance
Besoin d’aide ou d’un service ? Nous vous proposons des solutions sur mesure pour poursuivre rapidement vos activités.
