Toegevoegd aan je winkelmand!
IKA Labworldsoft® 6 Advanced
€9.528,00
Toegevoegd aan je winkelmand!
IKA VSE 1 Condenser
€616,00
Toegevoegd aan je winkelmand!
IKA Y hose connector 8 mm
€7,20
Toegevoegd aan je winkelmand!
IKA Labworldsoft® 6 Pro
€12.478,00
Toegevoegd aan je winkelmand!
IKA VH.SI.8 Vacuum hose
€49,00
Toegevoegd aan je winkelmand!
IKA Labworldsoft® 6 Starter
€5.469,00
IKA Vacuümpomp VACSTAR lite Advanced Solution
The VACSTAR lite Advanced Solution package is a modern and user-friendly solution for your vacuum applications in the laboratory
By combining the VC 10 pro vacuum controller with the VACSTAR lite vacuum pump, automatic boiling point detection is available via the integrated solvent library
The desired setpoint can also be conveniently set manually via the large, easy-to-read TFT display
In addition, the program mode enables the simple programming of several ramp steps in order to efficiently control complex simulations
Perfectly suited for a wide range of classic laboratory applications, including separation, filtration and drying processes
Ideal for use in conjunction with rotary evaporators, reactors, temperature control cabinets, centrifuges and other laboratory equipment
Automatic boiling point detection: Automatically determines and maintains the boiling point of your solvent using the integrated solvent library with pre-configured parameters for common solvents
Integrated device communication: The vacuum controller seamlessly synchronizes with circulators, resulting in optimized lab operations and increased overall performance
Longer life cycle: An integrated valve cleaning function removes residual solvent, extending system life and reducing maintenance
USB/RS232 interfaces: These enable connection to labworldsoft laboratory software for advanced process control
For additional safety and to protect the environment, we recommend using the vacuum safety emission condenser VSE 1 (available as an accessory), which prevents solvents from escaping into the room air
| Pump rate max. (50/60Hz) [m³/h] | 1 |
| Pump rate max. (50/60Hz) [l/min] | 16.67 |
| Final pressure without gas ballast [mbar] | 9 |
| Suction levels | 2 |
| Cylinder | 2 |
| Connection diameter suction side [mm] | 8 |
| Connection diameter pressure side [mm] | 8 |
| Gas ballast valve | no |
| Input pressure [mbar] | 10 - 1030 |
| Boiling point detection | yes |
| Solvent library | yes |
| Two-point control | yes |
| Analog speed vacuum control | yes |
| Speed range [rpm] | 285 - 1100 |
| Speed (50Hz) [rpm] | 1100 |
| Speed (60Hz) [rpm] | 1100 |
| Nominal speed [rpm] | 1100 |
| Display | TFT |
| Pressure unit / scale | mbar, hPa, mmHg, Torr |
| Vacuum sensor | yes |
| Vacuum sensor type | ceramic Al2O3 |
| Pressure max. for pressure sensor [bar] | 1.6 |
| Measurement range (absolute) [mbar] | 1 - 1100 |
| Control range [mbar] | 1 - 1100 |
| Resolution pressure [mbar] | 1 |
| Measurement uncertainty [mbar] | 1 |
| Medium temperature (gas) [°C] | 5 - 40 |
| Vacuum valve | yes |
| Venting valve | yes |
| Condensate trap | no |
| Emission condenser | no |
| Connection for ext. temperature sensor | PT1000 |
| Temperature unit | °C / °F |
| Temperature measuring range [°C] | -10 - 200 |
| Temperature measurement resolution [K] | 1 |
| Accuracy of temperature measurement [K] | ±1 |
| Timer | yes |
| Time setting min. [s] | 1 |
| Time setting max. [min] | 6000 |
| Noise at low. pressure [dB(A)] | 54 |
| Material in contact with medium | Al2O3; PTFE; FFPM; PPS; NBR |
| Housing material | alu-cast coating / thermoplastic polymer |
| Clean room qualified | no |
| Explosion proofed | no |
| Mode automatic | yes |
| Mode manual | yes |
| Mode pump % | yes |
| Mode program | yes |
| Graph function | yes |
| Chiller control | yes |
| Vacuum leakage test | yes |
| Dimensions (W x H x D) [mm] | 115 x 445 x 280 |
| Weight [kg] | 10 |
| Permissible ambient temperature [°C] | 5 - 40 |
| Permissible relative humidity | 80% (up to 31°C), decreasing linearly to max. 50 (@40°C) |
| Protection class according to DIN EN 60529 | IP 20 |
| RS 232 interface | yes |
| RS 485 interface | no |
| USB interface | USB-C |
| WPAN interface | no |
| WiFi Interface | no |
| Ethernet interface | no |
| Analog output | yes |
| Analog input | yes |
| Voltage [V] | 100 - 240 |
| Frequency [Hz] | 50/60 |
| Power input [W] | 144 |
| Power input standby [W] | 3.5 |
| Fuse | 2x T4A 250V |
The VACSTAR lite Advanced Solution package is a modern and user-friendly solution for your vacuum applications in the laboratory
By combining the VC 10 pro vacuum controller with the VACSTAR lite vacuum pump, automatic boiling point detection is available via the integrated solvent library
The desired setpoint can also be conveniently set manually via the large, easy-to-read TFT display
In addition, the program mode enables the simple programming of several ramp steps in order to efficiently control complex simulations
Perfectly suited for a wide range of classic laboratory applications, including separation, filtration and drying processes
Ideal for use in conjunction with rotary evaporators, reactors, temperature control cabinets, centrifuges and other laboratory equipment
Automatic boiling point detection: Automatically determines and maintains the boiling point of your solvent using the integrated solvent library with pre-configured parameters for common solvents
Integrated device communication: The vacuum controller seamlessly synchronizes with circulators, resulting in optimized lab operations and increased overall performance
Longer life cycle: An integrated valve cleaning function removes residual solvent, extending system life and reducing maintenance
USB/RS232 interfaces: These enable connection to labworldsoft laboratory software for advanced process control
For additional safety and to protect the environment, we recommend using the vacuum safety emission condenser VSE 1 (available as an accessory), which prevents solvents from escaping into the room air
Toebehoren
FAQ
Heb je vragen over dit product of over deze categorie? Op onze FAQ-sectie geven we je antwoord op veelgestelde vragen!
Bekijk de FAQJe kan onze experts altijd bereiken via info@imlab.eu
Of bel ons direct op +32 (0) 16 73 55 72
(Bereikbaar op werkdagen van 08:00 tot 17:00)
Stel direct je vraag
"*" geeft vereiste velden aan
Vergelijkbare producten
Onze diensten – méér dan een webshop
Bij Imlab koop je niet zomaar een product – je kiest voor een betrouwbare partner met een team dat voor je klaarstaat.
Geen robots, geen callcenter, maar ervaren specialisten die je helpen.
Onze service omvat:
- Kalibratie van je meetapparatuur
- Onsite installatie
- Herstellingen & onderhoud
Hulp nodig of een service aanvragen? We denken graag met je mee en bieden oplossingen op maat, zodat jij snel verder kan.
