Toegevoegd aan je winkelmand!
IKA H 135.301 Flask inlay 100 ml
€89,50
Toegevoegd aan je winkelmand!
IKA FLON 15 round (5 pcs.)
€12,40
Toegevoegd aan je winkelmand!
IKA FLON 30 slide round (5 pcs.)
€15,00
Toegevoegd aan je winkelmand!
IKA TRIKA 55 (5 pcs.)
€41,00
Toegevoegd aan je winkelmand!
IKA TRIKA 25 (5 pcs.)
€16,50
Toegevoegd aan je winkelmand!
IKA FLON 50 power (5 pcs.)
€63,50
Toegevoegd aan je winkelmand!
IKA FLON 50 ellipse (5 pcs.)
€78,50
Toegevoegd aan je winkelmand!
IKA FLON 40 ellipse (5 pcs.)
€56,00
Toegevoegd aan je winkelmand!
IKA H 30 Oil bath attachment, 1.5L
€315,00
Toegevoegd aan je winkelmand!
IKA H 135.108 Block 250 ml
€89,50
Toegevoegd aan je winkelmand!
IKA FLON 20 cross (5 pcs.)
€28,00
Toegevoegd aan je winkelmand!
IKA H 135.302 Flask inlay 250 ml
€89,50
Toegevoegd aan je winkelmand!
IKA RS 2 Set of magnetic stirring bars
€167,00
Toegevoegd aan je winkelmand!
IKA R 350 Universal clamp
€141,00
Toegevoegd aan je winkelmand!
IKA H 135.102 Block 16 x 8 ml
€89,50
Toegevoegd aan je winkelmand!
IKA FLON 40 slide round (5 pcs.)
€29,00
Toegevoegd aan je winkelmand!
IKA FLON 70 ellipse (5 pcs.)
€135,00
Toegevoegd aan je winkelmand!
IKA H 135.31 Flask carrier 500 ml with handle
€357,00
Toegevoegd aan je winkelmand!
IKA FLON 30 ellipse (5 pcs.)
€36,00
Toegevoegd aan je winkelmand!
IKA FLON 40 round (5 pcs.)
€19,00
Toegevoegd aan je winkelmand!
IKA FLON 74 beaker
€396,00
Toegevoegd aan je winkelmand!
IKA Temperatuur en pH-sensor PT Wireless
€198,00
Toegevoegd aan je winkelmand!
IKA TRIKA 80 (5 pcs.)
€57,00
Toegevoegd aan je winkelmand!
IKA FLON 30 cross (5 pcs.)
€39,00
Toegevoegd aan je winkelmand!
IKA HG 600 Heating jacket
€141,00
Toegevoegd aan je winkelmand!
IKA H 135.401 Flask inlay 500 ml
€159,00
Toegevoegd aan je winkelmand!
IKA RS 1 Set of magnetic stirring bars
€146,00
Toegevoegd aan je winkelmand!
IKA H 135.25 Flask carrier 250 ml without handle
€202,00
Toegevoegd aan je winkelmand!
IKA PT 1000.80 Temperature sensor, stainless steel
€179,00
Toegevoegd aan je winkelmand!
IKA FLON 9 crown (5 pcs.)
€16,50
Toegevoegd aan je winkelmand!
IKA H 135.20 Flask carrier 100 ml without handle
€159,00
Toegevoegd aan je winkelmand!
IKA H 135.50 Flask carrier 2000 ml without handle
€373,00
Toegevoegd aan je winkelmand!
IKA FLON 25 cross (5 pcs.)
€31,00
Toegevoegd aan je winkelmand!
IKA H 16.3 Extension
€24,50
Toegevoegd aan je winkelmand!
IKA FLON 25 round (5 pcs.)
€17,80
Toegevoegd aan je winkelmand!
IKA H 135.104 Block 4 x 20 ml
€89,50
Toegevoegd aan je winkelmand!
IKA H 135.105 Block 4 x 30 ml
€89,50
Toegevoegd aan je winkelmand!
IKA FLON 50 round (5 pcs.)
€21,00
Toegevoegd aan je winkelmand!
IKA FLON 54 bone (5 pcs.)
€84,00
Toegevoegd aan je winkelmand!
IKA H 135.201 Flask inlay 10 ml
€89,50
Toegevoegd aan je winkelmand!
IKA Elektronische Contact Thermometer ETS-D5
€348,00
Toegevoegd aan je winkelmand!
IKA H 135.10 Square carrier without handle
€186,00
Toegevoegd aan je winkelmand!
IKA FLON 30 power (5 pcs.)
€52,50
Toegevoegd aan je winkelmand!
IKA FLON 40 glass round (5 pcs.)
€36,00
Toegevoegd aan je winkelmand!
IKA H 135.107 Block 100 ml
€89,50
Toegevoegd aan je winkelmand!
IKA H 135.21 Flask carrier 100 ml with handle
€302,00
Toegevoegd aan je winkelmand!
IKA FLON 50 glass round (5 pcs.)
€38,00
Toegevoegd aan je winkelmand!
IKA H 135.106 Block 4 x 40 ml
€89,50
Toegevoegd aan je winkelmand!
IKA FLON 25 ellipse (5 pcs.)
€28,00
Toegevoegd aan je winkelmand!
IKA H 135.101 Block 16 x 4 ml
€89,50
Toegevoegd aan je winkelmand!
IKA FLON 30 round (5 pcs.)
€17,80
Toegevoegd aan je winkelmand!
IKA H 135.202 Flask inlay 25 ml
€89,50
Toegevoegd aan je winkelmand!
IKA FLON 37 bone (5 pcs.)
€69,50
Toegevoegd aan je winkelmand!
IKA H 135.51 Flask carrier 2000 ml with handle
€515,00
Toegevoegd aan je winkelmand!
IKA H 135.103 Block 9 x 16 ml
€89,50
Toegevoegd aan je winkelmand!
IKA H 44 Bevestigingsnoot
€37,80
Toegevoegd aan je winkelmand!
IKA FLON 35 ellipse (5 pcs.)
€44,50
Toegevoegd aan je winkelmand!
IKA H 135.26 Flask carrier 250 ml with handle
€345,00
Toegevoegd aan je winkelmand!
IKA H 29 Oil bath attachment, 1L
€285,00
Toegevoegd aan je winkelmand!
IKA H 135.203 Flask inlay 50 ml
€89,50
Toegevoegd aan je winkelmand!
IKA H 135.11 Square carrier with handle
€331,00
Toegevoegd aan je winkelmand!
IKA PT 1000.60 Temperatuursensor, inox
€169,00
Toegevoegd aan je winkelmand!
IKA H 135.501 Flask inlay 1000 ml
€229,00
Toegevoegd aan je winkelmand!
IKA FLON 10 cross (5 pcs.)
€19,00
Toegevoegd aan je winkelmand!
IKA FLON 80 round (5 pcs.)
€52,50
Toegevoegd aan je winkelmand!
IKA FLON 25 glass round (5 pcs.)
€36,00
Toegevoegd aan je winkelmand!
IKA H 135.40 Flask carrier 1000 ml without handle
€271,00
Toegevoegd aan je winkelmand!
IKA H 135.41 Flask carrier 1000 ml with handle
€416,00
Toegevoegd aan je winkelmand!
IKA Draadloze Temperatuursensor ETS-D7
€498,00
Toegevoegd aan je winkelmand!
IKA FLON 20 ellipse (5 pcs.)
€24,50
Toegevoegd aan je winkelmand!
IKA PT 1000.90 Temperature sensor, coated
€239,00
Toegevoegd aan je winkelmand!
IKA FLON 50 slide round (5 pcs.)
€32,00
Toegevoegd aan je winkelmand!
IKA FLON 20 round (5 pcs.)
€15,00
Toegevoegd aan je winkelmand!
IKA FLON 25 slide round (5 pcs.)
€15,00
Toegevoegd aan je winkelmand!
IKA FLON 20 power (5 pcs.)
€36,00
Toegevoegd aan je winkelmand!
IKA FLON 38 cross (5 pcs.)
€48,00
Toegevoegd aan je winkelmand!
IKA TRIKA 35 (5 pcs.)
€28,00
Toegevoegd aan je winkelmand!
IKA PT 1000.70 Temperature sensor, glass coated
€186,00
Toegevoegd aan je winkelmand!
IKA HG 1000 Heating jacket
€168,00
Toegevoegd aan je winkelmand!
IKA H 135.30 Flask carrier 500 ml without handle
€217,00
Toegevoegd aan je winkelmand!
IKA FLON 10 round (5 pcs.)
€11,10
Toegevoegd aan je winkelmand!
IKA H 16 V Statiefstaaf
€79,65
Toegevoegd aan je winkelmand!
IKA Magnetische roerder RET basic
€1.298,00
IKA Magnetische roerder RET basic anodized
RET basic: The new benchmark for digitalization, laboratory safety and efficiency
The new IKA RET basic magnetic stirrer sets a new industry standard. As the currently smallest magnetic stirrer with 800 W heating power and a maximum temperature of 340 °C, it combines uncompromising safety, outstanding robustness and maximum efficiency with intuitive and effortless operation
Designed for seamless integration into networked laboratory infrastructures, the RET basic is equipped as standard with integrated WLAN and LAN interfaces. This makes it the ideal solution for digitalization and documentation projects in which devices need to be centrally networked, monitored, controlled or integrated into software systems
The high IP54 protection class and the solid die-cast aluminum housing reliably protect the device from liquids, aggressive vapors, and mechanical influences – for trouble-free continuous operation even under harsh laboratory conditions
The compact design (only 160 x 200 x 100 mm) saves valuable space in the fume hood, fits on almost any laboratory lifting platform, and enables flexible, parallel test setups. This means users benefit from greater safety, greater efficiency, and more freedom in their everyday laboratory work
RET basic is manufactured in Germany in a fully automated production facility using state-of-the-art robot systems. This guarantees the highest quality and absolute reliability for maximum safety and a long service life
The high-quality anodized coating provides reliable protection against scratches and a wide range of chemicals. This means that the heating plate remains in perfect condition, both visually and functionally, even after prolonged use
The aluminum substrate ensures homogeneous temperature distribution and rapid energy transfer to the sample vessel
For the first time, the RET basic comes with integrated menu functionality, which significantly expands the range of functions— for example with timer functionality. This also enables the integration of wireless temperature sensors (accessories required)
The freely programmable timer starts either immediately or after the target temperature has been reached and signals the end of the process with an acoustic signal. You decide whether the heating and/or stirring should be switched off
The brushless EC motor and high-quality magnets ensure excellent magnetic coupling at up to 1700 rpm
The insulated and thus energy-optimized heating plate has an output of 800 W and enables heating rates of up to 9 K/min
The heating rate can be adjusted in four stages – for slow, gentle, or fast heating depending on the application
For decades, IKA has followed the approach that the safety temperature specified by the user must be set consciously and independently of setpoints using a tool. A new feature is the monitoring of the medium temperature. IKA is thus one of the few manufacturers that not only fully complies with the EN IEC 61010-2-010 laboratory equipment standard for heated devices, but even exceeds it in many respects. Safety is not only certified by a CE declaration, but also independently tested and certified by TÜV Süd according to the internationally recognized NRTL standard – the same safety standard followed by UL and CSA. The customizable 14-segment glass display gives the user complete freedom: you decide which parameters are relevant for your application and can display them permanently – whether speed, temperature, pH value, or timer. In combination with the PT.Wireless and ETS-D7 wireless sensors, the RCT/RET even becomes a fully-fledged pH meter. This saves space, reduces investment, and simplifies the test setup
IKA takes safety to a new level – beyond pure device safety. In addition to the option of monitoring and controlling the RET basic via software (e.g. IKA Labworldsoft®) via the integrated RS232, USB, LAN or WLAN interface (communication via ASCII-based commands (Namur standard)), direct communication with IKA devices, e.g. the overhead stirrers (EUROSTAR), is now possible. This can be a decisive safety advantage when tempering and mixing viscous samples using the RET basic as a pure heating plate, enabling unmonitored 24/7 operation. In this case, the device automatically detects when the stirring speed of the stirrer falls below a critical value and switches off the heating in this case. This actively protects not only the individual device, but the entire test setup
The new IKA RET basic offers a sophisticated, multi-level safety concept, innovative operation, and maximum flexibility—all with minimal space requirements and maximum "Made in Germany" quality. IKA takes safety one step further: intelligent networking and digitalization make not only individual devices but entire laboratory processes safer, more efficient, and more future-proof
Independent safety circuit according to EN IEC 61010-2-010: Two separate temperature sensors under the heating plate: one regulates the set temperature, the second monitors an individually adjustable safety limit (e.g. flash point). The setting is made mechanically directly on the device – independently of the process setpoint. This ensures maximum safety even with flammable liquids and in the worst-case scenario (e.g. broken glass)
Monitoring the temperature in the medium with the Delta-T safety function: A definable temperature difference to the medium setpoint ensures that if this is exceeded (due to an unexpected reaction or external heat source), the heating is switched off until restart (stirring remains active). This allows safe approach to critical temperatures without risking shutdown due to slight overshoots
Detection of sudden temperature drops: The RET basic detects sudden drops in medium temperature (e.g. due to glass breakage or evaporation of the medium) and can—depending on the setting—switch off the heating permanently
Detection of failure to increase temperature: If no temperature increase is detected despite the energy supply ( e.g. incorrectly positioned sensor), the device automatically deactivates the heating
Dual sensors for medium and carrier medium: Up to two temperature sensors (wired and wireless) can be connected – for redundant or spatially differentiated monitoring, e.g. of a carrier medium
Temperature limits for medium and carrier: Hard temperature limits for medium and carrier medium can be set in the software to prevent operating errors and dangerous conditions
Warning of hot surface (>
50 °C): A visual warning signals when the heating plate is hot—even when the device is switched off. This provides reliable protection against burns
Combination with IKA contact thermometer (ETS-D5): Combining with the ETS-D5 contact thermometer creates an additional, independent safety circuit. This also results in even better measurement accuracy and a clear display at the measuring point
Combination with IKA wireless temperature sensors PT.Wireless and ETS-D7: The elimination of cables significantly reduces the risk of cable breakage and makes the entire test setup clearer and tidier
Networked safety through communication with other IKA devices: The RET basic can communicate directly with IKA overhead stirrers (via interface or wirelessly). If the speed falls below a freely definable critical stirring speed, the device automatically switches off the heating. This ensures the safety of the entire test setup – not just that of the individual device
Safe monitoring in the laboratory with the IKA Lab Assistant (app) – coming soon: The IKA Lab Assistant enables wireless monitoring within the laboratory – for maximum flexibility and control (accessories required)
"Always Stir" – stirring remains active in the event of a fault: In the event of errors or safety shutdowns, the stirring function remains active to prevent boiling delays and hot spots
Robust, closed design (IP54) &
die-cast aluminum housing: The almost completely enclosed housing is resistant to aggressive vapors and liquids. The aluminum ensures durability and mechanical safety
Mechanical safety &
construction: Two mounting points for tripod rods enable flexible, stable sensor and structure fixation without additional clamps
Operating modes with access protection: The behavior after power-up and access to set-points can be specifically restricted to prevent unintentional status changes—for maximum process reliability and ease of use.
| Number of stirring positions [-] | 1 |
| Stirring quantity max. per stirring position (H2O) [l] | 20 |
| Maximum load [kg] | 25 |
| Motor rating output [W] | 9 |
| Motor principle [-] | Brushless DC |
| Direction of rotation [-] | right |
| Speed display set-value [-] | LED |
| Speed display actual-value [-] | LED |
| Speed adjustment [-] | Control knob (Rotating / Pressing) |
| Speed min. [rpm] | 50 |
| Speed max. [rpm] | 1700 |
| Setting accuracy speed [rpm] | 10 |
| Stirring bar length min. [mm] | 20 |
| Stirring bar length max. [mm] | 80 |
| Self-heating of the set-up plate by max. stirring (RT | 22°C/duration:1h) [K]: +15 |
| Heat output [W] | 800 |
| Temperature display set-value [-] | LED |
| Temperature display actual-value [-] | LED |
| Temperature unit [-] | °C |
| Heating temperature min. [°C] | Room temp. + device self heating |
| Heating temperature max. [°C] | 340 |
| Heat control [-] | Control knob (Rotating / Pressing) |
| Display resolution [K] | 0.1 |
| Temperature setting range min. [°C] | 0 |
| Temperature setting range max. [°C] | 340 |
| Temperature setting resolution of heating plate [K] | 1 |
| Connection for ext. temperature sensor [-] | PT1000, ETS-D5, ETS-D7, PT wireless |
| Temperature setting resolution of medium [K] | 0.1 |
| Operating temperature min. (with external cooling) [°C] | -20 |
| Adjustable safety circuit min. [°C] | 50 |
| Adjustable safety circuit max. [°C] | 360 |
| Set-up plate material [-] | Aluminum with ceramic coating |
| Set-up plate dimensions [mm] | Ø 135 |
| Automatic reverse rotation [-] | optional (with IKA HUB) |
| Intermittent mode [-] | optional (with IKA HUB) |
| Viscosity trend measurement [-] | optional (with IKA HUB) |
| Break detection stirring bar [-] | optional (with IKA HUB) |
| Timer [-] | yes |
| Timer display [-] | LED |
| Time setting min. [s] | 1 |
| Time setting max. [min] | 5999 |
| pH measurement [-] | optional (with ETS-D7, PT wireless) |
| Programs [-] | optional (with IKA HUB) |
| Sensor in medium detection [-] | yes |
| Temperature measure range PT1000 min. [°C] | -20 |
| PT 1000 deviation;DIN EN 60751 Kl. A [K] | ≤ ± (0.15 +0.002xITI) |
| Temperature measure range PT1000 max. [°C] | 340 |
| Speed deviation (no load,nominal voltage, at 1500rpm + 25 °C) [%] | ±2 |
| Heating rate (1l H2O in H1500) [K/min] | 9 |
| Heat control accuracy of heating plate centre without vessel (at 100°C) [K] | ±5 |
| Heat control accuracy with ext. PT1000 (500ml H2O in 600ml beaker,40mm stirring bar,600rpm,50°C) [K] | ±0.5 |
| Heat control accuracy with ETS-D5 (500ml H2O in 600ml beaker,40mm stirring bar,600rpm,50°C) [K] | ±0.5 |
| Heat control accuracy with ETS-D7 (500ml H2O in 600ml beaker, 40mm stirring bar, 600rpm, 50°C) [K] | ±0.2 |
| Heat control accuracy with PT wireless (500ml H2O in 600ml beaker, 40mm stirring bar, 600rpm, 50°C) [K] | ±0.2 |
| Width [mm] | 160 |
| Depth [mm] | 200 |
| Height [mm] | 100 |
| Weight [kg] | 2.3 |
| Permissible ambient temperature min. [°C] | 5 |
| Permissible ambient temperature max. [°C] | 40 |
| Permissible relative humidity [%] | 80 |
| Protection class according to DIN EN 60529 [-] | IP 54 |
| RS 232 interface [-] | yes |
| USB interface [-] | USB-C |
| WPAN interface [-] | yes |
| WiFi Interface [-] | yes |
| Ethernet interface [-] | yes |
| Voltage [V] | 220 - 230 |
| Frequency [Hz] | 50/60 |
| Power input [W] | 820 |
| Power input standby [W] | 0.45 |
RET basic: The new benchmark for digitalization, laboratory safety and efficiency
The new IKA RET basic magnetic stirrer sets a new industry standard. As the currently smallest magnetic stirrer with 800 W heating power and a maximum temperature of 340 °C, it combines uncompromising safety, outstanding robustness and maximum efficiency with intuitive and effortless operation
Designed for seamless integration into networked laboratory infrastructures, the RET basic is equipped as standard with integrated WLAN and LAN interfaces. This makes it the ideal solution for digitalization and documentation projects in which devices need to be centrally networked, monitored, controlled or integrated into software systems
The high IP54 protection class and the solid die-cast aluminum housing reliably protect the device from liquids, aggressive vapors, and mechanical influences – for trouble-free continuous operation even under harsh laboratory conditions
The compact design (only 160 x 200 x 100 mm) saves valuable space in the fume hood, fits on almost any laboratory lifting platform, and enables flexible, parallel test setups. This means users benefit from greater safety, greater efficiency, and more freedom in their everyday laboratory work
RET basic is manufactured in Germany in a fully automated production facility using state-of-the-art robot systems. This guarantees the highest quality and absolute reliability for maximum safety and a long service life
The high-quality anodized coating provides reliable protection against scratches and a wide range of chemicals. This means that the heating plate remains in perfect condition, both visually and functionally, even after prolonged use
The aluminum substrate ensures homogeneous temperature distribution and rapid energy transfer to the sample vessel
For the first time, the RET basic comes with integrated menu functionality, which significantly expands the range of functions— for example with timer functionality. This also enables the integration of wireless temperature sensors (accessories required)
The freely programmable timer starts either immediately or after the target temperature has been reached and signals the end of the process with an acoustic signal. You decide whether the heating and/or stirring should be switched off
The brushless EC motor and high-quality magnets ensure excellent magnetic coupling at up to 1700 rpm
The insulated and thus energy-optimized heating plate has an output of 800 W and enables heating rates of up to 9 K/min
The heating rate can be adjusted in four stages – for slow, gentle, or fast heating depending on the application
For decades, IKA has followed the approach that the safety temperature specified by the user must be set consciously and independently of setpoints using a tool. A new feature is the monitoring of the medium temperature. IKA is thus one of the few manufacturers that not only fully complies with the EN IEC 61010-2-010 laboratory equipment standard for heated devices, but even exceeds it in many respects. Safety is not only certified by a CE declaration, but also independently tested and certified by TÜV Süd according to the internationally recognized NRTL standard – the same safety standard followed by UL and CSA. The customizable 14-segment glass display gives the user complete freedom: you decide which parameters are relevant for your application and can display them permanently – whether speed, temperature, pH value, or timer. In combination with the PT.Wireless and ETS-D7 wireless sensors, the RCT/RET even becomes a fully-fledged pH meter. This saves space, reduces investment, and simplifies the test setup
IKA takes safety to a new level – beyond pure device safety. In addition to the option of monitoring and controlling the RET basic via software (e.g. IKA Labworldsoft®) via the integrated RS232, USB, LAN or WLAN interface (communication via ASCII-based commands (Namur standard)), direct communication with IKA devices, e.g. the overhead stirrers (EUROSTAR), is now possible. This can be a decisive safety advantage when tempering and mixing viscous samples using the RET basic as a pure heating plate, enabling unmonitored 24/7 operation. In this case, the device automatically detects when the stirring speed of the stirrer falls below a critical value and switches off the heating in this case. This actively protects not only the individual device, but the entire test setup
The new IKA RET basic offers a sophisticated, multi-level safety concept, innovative operation, and maximum flexibility—all with minimal space requirements and maximum "Made in Germany" quality. IKA takes safety one step further: intelligent networking and digitalization make not only individual devices but entire laboratory processes safer, more efficient, and more future-proof
Independent safety circuit according to EN IEC 61010-2-010: Two separate temperature sensors under the heating plate: one regulates the set temperature, the second monitors an individually adjustable safety limit (e.g. flash point). The setting is made mechanically directly on the device – independently of the process setpoint. This ensures maximum safety even with flammable liquids and in the worst-case scenario (e.g. broken glass)
Monitoring the temperature in the medium with the Delta-T safety function: A definable temperature difference to the medium setpoint ensures that if this is exceeded (due to an unexpected reaction or external heat source), the heating is switched off until restart (stirring remains active). This allows safe approach to critical temperatures without risking shutdown due to slight overshoots
Detection of sudden temperature drops: The RET basic detects sudden drops in medium temperature (e.g. due to glass breakage or evaporation of the medium) and can—depending on the setting—switch off the heating permanently
Detection of failure to increase temperature: If no temperature increase is detected despite the energy supply ( e.g. incorrectly positioned sensor), the device automatically deactivates the heating
Dual sensors for medium and carrier medium: Up to two temperature sensors (wired and wireless) can be connected – for redundant or spatially differentiated monitoring, e.g. of a carrier medium
Temperature limits for medium and carrier: Hard temperature limits for medium and carrier medium can be set in the software to prevent operating errors and dangerous conditions
Warning of hot surface (>
50 °C): A visual warning signals when the heating plate is hot—even when the device is switched off. This provides reliable protection against burns
Combination with IKA contact thermometer (ETS-D5): Combining with the ETS-D5 contact thermometer creates an additional, independent safety circuit. This also results in even better measurement accuracy and a clear display at the measuring point
Combination with IKA wireless temperature sensors PT.Wireless and ETS-D7: The elimination of cables significantly reduces the risk of cable breakage and makes the entire test setup clearer and tidier
Networked safety through communication with other IKA devices: The RET basic can communicate directly with IKA overhead stirrers (via interface or wirelessly). If the speed falls below a freely definable critical stirring speed, the device automatically switches off the heating. This ensures the safety of the entire test setup – not just that of the individual device
Safe monitoring in the laboratory with the IKA Lab Assistant (app) – coming soon: The IKA Lab Assistant enables wireless monitoring within the laboratory – for maximum flexibility and control (accessories required)
"Always Stir" – stirring remains active in the event of a fault: In the event of errors or safety shutdowns, the stirring function remains active to prevent boiling delays and hot spots
Robust, closed design (IP54) &
die-cast aluminum housing: The almost completely enclosed housing is resistant to aggressive vapors and liquids. The aluminum ensures durability and mechanical safety
Mechanical safety &
construction: Two mounting points for tripod rods enable flexible, stable sensor and structure fixation without additional clamps
Operating modes with access protection: The behavior after power-up and access to set-points can be specifically restricted to prevent unintentional status changes—for maximum process reliability and ease of use.
Toebehoren
Série
FAQ
Heb je vragen over dit product of over deze categorie? Op onze FAQ-sectie geven we je antwoord op veelgestelde vragen!
Bekijk de FAQJe kan onze experts altijd bereiken via info@imlab.eu
Of bel ons direct op +32 (0) 16 73 55 72
(Bereikbaar op werkdagen van 08:00 tot 17:00)
Stel direct je vraag
"*" geeft vereiste velden aan
Vergelijkbare producten
Onze diensten – méér dan een webshop
Bij Imlab koop je niet zomaar een product – je kiest voor een betrouwbare partner met een team dat voor je klaarstaat.
Geen robots, geen callcenter, maar ervaren specialisten die je helpen.
Onze service omvat:
- Kalibratie van je meetapparatuur
- Onsite installatie
- Herstellingen & onderhoud
Hulp nodig of een service aanvragen? We denken graag met je mee en bieden oplossingen op maat, zodat jij snel verder kan.
