Toegevoegd aan je winkelmand!
IKA VC 10.500 Stand pole
€100,00
Toegevoegd aan je winkelmand!
IKA VSE 1 Condenser
€603,00
Toegevoegd aan je winkelmand!
IKA Y hose connector 8 mm
€6,90
Toegevoegd aan je winkelmand!
IKA Labworldsoft® 6 Pro
€12.114,00
Toegevoegd aan je winkelmand!
IKA VH.SI.8 Vacuum hose
€48,00
Toegevoegd aan je winkelmand!
IKA Labworldsoft® 6 Starter
€5.309,00
Toegevoegd aan je winkelmand!
IKA LR-2.ST the High-Performer High Viscosity Reactor
€15.974,00
IKA VACSTAR digital Chemische membraanpomp
The four-chamber membrane vacuum pump convinces with its high suction capacity, low space requirement and high serviceability
The setting of the parameters is carried out through a rotary-push button over a digital display showing current rpm
Automated processes are controlled with the vacuum controller VC 10, which is available as an accessory
An analogue cable which is required for connecting pump and controller is included in the delivery of the pump
Additionally it is recommended to use the VSE 1 vacuum safety emmission
It prevents that solvents are released into ambient air
The Vacstar digital is used for dry and oil-free applications in the laboratory
The membranes of the pump are particularly chemical resistant
| Pump rate max. (50/60Hz) [m³/h] | 1.32 |
| Pump rate max. (50/60Hz) [l/min] | 22 |
| Final pressure without gas ballast [mbar] | 2 |
| Suction levels | 4 |
| Cylinder | 4 |
| Connection diameter suction side [mm] | 8 |
| Connection diameter pressure side [mm] | 8 |
| Gas ballast valve | no |
| Input pressure [mbar] | 2 - 1030 |
| Boiling point detection | no |
| Solvent library | no |
| Two-point control | yes |
| Analog speed vacuum control | yes |
| Speed adjustment | Turning knob |
| Speed range [rpm] | 285 - 1200 |
| Display | LED |
| Vacuum sensor | no |
| Venting valve | no |
| Condensate trap | no |
| Emission condenser | no |
| Noise at low. pressure [dB(A)] | 54 |
| Material in contact with medium | Al2O3; PTFE; FFPM; PPS; NBR |
| Housing material | alu-cast coating / thermoplastic polymer |
| Clean room qualified | no |
| Explosion proofed | no |
| Dimensions (W x H x D) [mm] | 150 x 375 x 370 |
| Weight [kg] | 11.5 |
| Permissible ambient temperature [°C] | 5 - 40 |
| Permissible relative humidity | 80% (up to 31°C), decreasing linearly to max. 50 (@40°C) |
| Protection class according to DIN EN 60529 | IP 20 |
| RS 232 interface | yes |
| USB interface | yes |
| Analog output | no |
| Voltage [V] | 100 - 240 |
| Frequency [Hz] | 50/60 |
| Power input [W] | 130 |
| Power input standby [W] | 3 |
The four-chamber membrane vacuum pump convinces with its high suction capacity, low space requirement and high serviceability
The setting of the parameters is carried out through a rotary-push button over a digital display showing current rpm
Automated processes are controlled with the vacuum controller VC 10, which is available as an accessory
An analogue cable which is required for connecting pump and controller is included in the delivery of the pump
Additionally it is recommended to use the VSE 1 vacuum safety emmission
It prevents that solvents are released into ambient air
The Vacstar digital is used for dry and oil-free applications in the laboratory
The membranes of the pump are particularly chemical resistant
Toebehoren
FAQ
Heb je vragen over dit product of over deze categorie? Op onze FAQ-sectie geven we je antwoord op veelgestelde vragen!
Bekijk de FAQJe kan onze experts altijd bereiken via info@imlab.eu
Of bel ons direct op +32 (0) 16 73 55 72
(Bereikbaar op werkdagen van 08:00 tot 17:00)
Stel direct je vraag
"*" indicates required fields
Vergelijkbare producten
Wij zijn Imlab
Imlab, verdeler gespecialiseerd in laboratoriummateriaal, biedt al 25 jaar lang producten van hoge kwaliteit en persoonlijke service
Mooie samenwerking met topmerken
Innovatieve en betrouwbare merken
Service op maat
Industrie, voeding, laboratorium, medisch...
