Toegevoegd aan je winkelmand!
IKA BMT-20-S-IVD.50 Ball milling tube, sterile, IVD label
€883,00
Toegevoegd aan je winkelmand!
IKA BMT-20-S-IVD1.50 Ball milling tube, sterile, IVD label
€690,00
Toegevoegd aan je winkelmand!
IKA UTTD control Pharma Solution
€1.726,00
Toegevoegd aan je winkelmand!
IKA UTTD control Life Science Solution
€1.743,00
Toegevoegd aan je winkelmand!
IKA UTTD control IVD Solution Maalmolen
€1.973,00
IKA UTTD basic IVD Solution Maalmolen
Microbiological and molecular biological analysis of patient samples
The crushing and disruption of tissue, cartilage and bone samples is an essential step before the actual microbiological and molecular biological analysis of patient samples.
The challenges in this preoperative step are to crush the sample homogeneously and not to contaminate the sample on the way to analysis.
With the ULTRA-TURRAX® Tube Drive, IKA offers a powerful, universal shredding drive that is operated in combination with patented disposable plastic containers.
The sample containers specially developed for in-vitro diagnostics are available in single or double sterile packaging and are already filled with 5 ml of 0.90% saline solution.
The crushing of the sample is carried out with 10 stainless steel balls contained in the tube, which are set in motion with the help of the drive via a tumbler with up to 3000 revolutions. The accelerated balls break up the sample or reliably detach tissue from the bone. Any germs that may be present pass into the liquid phase (NaCl solution).
The sample material can be introduced into the sterile sample container directly in the or after opening the lid. The subsequent transport to the laboratory takes place in a hermetically sealed container.
In the microbiological laboratory, the tube is placed directly on the drive and the sample is crushed. This eliminates the need for additional mechanical processing. A risk of cross-contamination can thus be ruled out. The samples can then be taken via the pierceable membrane in the sample lid.
The lockable disposable sample tubes are transport containers, comminution containers and storage all in one. They significantly reduce the cleaning effort and systematically rule out cross-contamination. Users benefit from reduced handling costs and a reduced number of incorrect diagnoses.
The disposable tubes BMT-20-S-IVD included in the package are a Invitro diagnostic product according to Directive 98/79/EG and manufactured according to ISO 13485:2016. Approved for all EU countries.
Important note: The maximum processing time for the tubes is 1 minute using an automated process similar to the ULTRA-TURRAX® Tube Drive. If the processing time is longer, the mechanical load can become too great and leaks can occur. The process must be validated by the customer.
Please also note the operating instructions for the ULTRA-TURRAX® Tube Drive.
Scope of delivery: ULTRA-TURRAX® Tube Drive | BMT-20-S-IVD.50 Ball milling tube, sterile, IVD label, 20 ml
| Motor rating input [W] | 20 |
| Motor rating output [W] | 17 |
| Speed display | scale |
| Speed range [rpm] | 300 - 6000 |
| Viscosity max. [mPas] | 5000 |
| Speed deviation [%] | 10 |
| Speed adjustment | stepless |
| Noise without element [dB(A)] | 50 |
| Process type | batch |
| Dimensions (W x H x D) [mm] | 100 x 40 x 160 |
| Weight [kg] | 0.75 |
| Permissible ambient temperature [°C] | 5 - 40 |
| Permissible relative humidity [%] | 80 |
| Protection class according to DIN EN 60529 | IP 20 |
| Voltage [V] | 100 - 240 |
| Frequency [Hz] | 50/60 |
| Power input [W] | 20 |
| DC Voltage [V=] | 24 |
| Current consumption [mA] | 800 |
Microbiological and molecular biological analysis of patient samples
The crushing and disruption of tissue, cartilage and bone samples is an essential step before the actual microbiological and molecular biological analysis of patient samples.
The challenges in this preoperative step are to crush the sample homogeneously and not to contaminate the sample on the way to analysis.
With the ULTRA-TURRAX® Tube Drive, IKA offers a powerful, universal shredding drive that is operated in combination with patented disposable plastic containers.
The sample containers specially developed for in-vitro diagnostics are available in single or double sterile packaging and are already filled with 5 ml of 0.90% saline solution.
The crushing of the sample is carried out with 10 stainless steel balls contained in the tube, which are set in motion with the help of the drive via a tumbler with up to 3000 revolutions. The accelerated balls break up the sample or reliably detach tissue from the bone. Any germs that may be present pass into the liquid phase (NaCl solution).
The sample material can be introduced into the sterile sample container directly in the or after opening the lid. The subsequent transport to the laboratory takes place in a hermetically sealed container.
In the microbiological laboratory, the tube is placed directly on the drive and the sample is crushed. This eliminates the need for additional mechanical processing. A risk of cross-contamination can thus be ruled out. The samples can then be taken via the pierceable membrane in the sample lid.
The lockable disposable sample tubes are transport containers, comminution containers and storage all in one. They significantly reduce the cleaning effort and systematically rule out cross-contamination. Users benefit from reduced handling costs and a reduced number of incorrect diagnoses.
The disposable tubes BMT-20-S-IVD included in the package are a Invitro diagnostic product according to Directive 98/79/EG and manufactured according to ISO 13485:2016. Approved for all EU countries.
Important note: The maximum processing time for the tubes is 1 minute using an automated process similar to the ULTRA-TURRAX® Tube Drive. If the processing time is longer, the mechanical load can become too great and leaks can occur. The process must be validated by the customer.
Please also note the operating instructions for the ULTRA-TURRAX® Tube Drive.
Scope of delivery: ULTRA-TURRAX® Tube Drive | BMT-20-S-IVD.50 Ball milling tube, sterile, IVD label, 20 ml
Toebehoren
Serie
FAQ
Heb je vragen over dit product of over deze categorie? Op onze FAQ-sectie geven we je antwoord op veelgestelde vragen!
Bekijk de FAQJe kan onze experts altijd bereiken via info@imlab.eu
Of bel ons direct op +32 (0) 16 73 55 72
(Bereikbaar op werkdagen van 08:00 tot 17:00)
Stel direct je vraag
"*" geeft vereiste velden aan
Vergelijkbare producten
Onze diensten – méér dan een webshop
Bij Imlab koop je niet zomaar een product – je kiest voor een betrouwbare partner met een team dat voor je klaarstaat.
Geen robots, geen callcenter, maar ervaren specialisten die je helpen.
Onze service omvat:
- Kalibratie van je meetapparatuur
- Onsite installatie
- Herstellingen & onderhoud
Hulp nodig of een service aanvragen? We denken graag met je mee en bieden oplossingen op maat, zodat jij snel verder kan.
