Toegevoegd aan je winkelmand!
IKA MultiDrive DI 2000 T Dispersinger with temp. measurement
€1.205,00
Toegevoegd aan je winkelmand!
IKA MultiDrive BT 250.5 Blending tube, autoclavable
€82,50
Toegevoegd aan je winkelmand!
IKA MultiDrive MI 250.2 Star shaped cutter, stainless steel
€172,00
Toegevoegd aan je winkelmand!
IKA MultiDrive BL 2000.1 Standard blend knife
€147,00
Toegevoegd aan je winkelmand!
IKA MultiDrive MI 400.2 Star shaped cutter, stainless steel
€195,00
Toegevoegd aan je winkelmand!
IKA MultiDrive MI 250 T – S
€1.103,00
Toegevoegd aan je winkelmand!
IKA MultiDrive MI 400.1 Standard beater, stainless steel
€111,00
Toegevoegd aan je winkelmand!
IKA MultiDrive MI 400 – S
€1.102,00
Toegevoegd aan je winkelmand!
IKA MultiDrive TC 1 Protective housing
€166,00
Toegevoegd aan je winkelmand!
IKA MultiDrive CS 1
€21,50
Toegevoegd aan je winkelmand!
IKA MultiDrive TS 1 Spare seal with reactivation code
€18,00
Toegevoegd aan je winkelmand!
IKA MultiDrive BL 2000 T Blender vessel
€567,00
Toegevoegd aan je winkelmand!
IKA MultiDrive MI 250.1 Standard beater, stainless steel
€86,50
Toegevoegd aan je winkelmand!
IKA MultiDrive MT 150.5 Milling tube, autoclavable
€77,50
Toegevoegd aan je winkelmand!
IKA MultiDrive MI 250 – S
€967,00
Toegevoegd aan je winkelmand!
IKA MultiDrive MI 400.3 Beater, tungsten carbide
€402,00
Toegevoegd aan je winkelmand!
IKA MultiDrive MI 250.3 Beater, tungsten carbide
€366,00
Toegevoegd aan je winkelmand!
IKA MultiDrive MI 400 T – S
€1.253,00
Toegevoegd aan je winkelmand!
IKA MultiDrive control Maalmolen
€4.557,00
Toegevoegd aan je winkelmand!
IKA MultiDrive control BT Package Maalmolen
€4.470,00
IKA MultiDrive control MT Package Maalmolen
Scope of delivery : IKA MultiDrive control, MultiDrive TC 1 Protective housing, MultiDrive MT 150.5 Milling tube, autoclavable
Crushing without cross-contamination - this is possible with the MultiDrive control package including autoclavable disposable tubes MT 150 for dry samples.
MT 150 is a disposable tube with a typical stainless steel beater. The plastic milling tube can be autoclaved. This effectively prevents cross-contamination even if it is used multiple times. An integrated RFID chip simultaneously stores and limits the lifespan of the milling tube. 5 spare seals are included in the scope of delivery. By replacing the seal, the service life of the milling tube can be extended. The disposable tube can only be operated with the TC 1 protective housing which is also included in the scope of delivery.
MultiDrive control universal crusher can perform a wide range of crushing tasks involving coarse and fine crushing, thanks to the variety of vessels available. There is a USB interface available for easy actuation and documentation.
High performance : Excellent crushing performance is guaranteed by a combination of variable rotational speeds, ranging from 3000 rpm to 20 000 rpm, and a 1000 Watt output.
Interval operation : The option of interval programming is simple to activate at the press of a button. Interval operation is an asset during the coarse crushing of hard samples or for extra thorough blending.
TFT-display : A clear TFT-display guarantees user-friendly operation.
Weighing function : The weighing function is also integrated into the user-friendly workflow of IKA MultiDrive control. Weighing is performed before crushing using the same mixing vessel, so that no transfer of contents is required.
Variety of vessels (accessories) : MultiDrive offers the right container for every grinding task. For MultiDrive control, milling chambers (MI) for dry grinding, blending vessels (BL) for wet grinding, dispersing vessels (DI) with rotor-stator system as well as autoclavable milling tubes (MT 150) and blending tubes (BT 250) made of plastic are available. The vessels are not included in the scope of delivery.
| Process type | batch |
| Operating principle | cutting/impact/blending/dispersing |
| Motor rating input [W] | 1000 |
| Motor rating output [W] | 800 |
| Speed range [rpm] | 3000 - 20000 |
| Speed deviation [%] | ±5 |
| Power-ON time [min] | 5 |
| Power-OFF time [min] | 10 |
| Motor principle | Brushless DC |
| Display | TFT |
| RFID reader/writer unit | yes |
| Temperature display | yes |
| Temperature measurement resolution [K] | 0.1 |
| Accuracy of temperature measurement [K] | ±1 |
| Temperature limit min. [°C] | -50 |
| Temperature limit max. [°C] | 120 |
| Monitoring maintain time | yes |
| Weighing function | yes |
| Weighing range [g] | 5 - 4000 |
| Weighing resolution [g] | 1 |
| Load capacity weighing function max. [kg] | 4 |
| Weighing accuracy | ±(0.3%+2) g |
| Vessels detection | yes |
| Ramp programming | yes |
| Dimensions (W x H x D) [mm] | 300 x 350 x 250 |
| Weight [kg] | 8.5 |
| Permissible ambient temperature [°C] | 5 - 40 |
| Permissible relative humidity [%] | 80 |
| Protection class according to DIN EN 60529 | IP 31 |
| USB interface | yes |
| Bluetooth interface | yes |
| Voltage [V] | 220 - 240 |
| Frequency [Hz] | 50/60 |
| Power input [W] | 1000 |
Scope of delivery : IKA MultiDrive control, MultiDrive TC 1 Protective housing, MultiDrive MT 150.5 Milling tube, autoclavable
Crushing without cross-contamination - this is possible with the MultiDrive control package including autoclavable disposable tubes MT 150 for dry samples.
MT 150 is a disposable tube with a typical stainless steel beater. The plastic milling tube can be autoclaved. This effectively prevents cross-contamination even if it is used multiple times. An integrated RFID chip simultaneously stores and limits the lifespan of the milling tube. 5 spare seals are included in the scope of delivery. By replacing the seal, the service life of the milling tube can be extended. The disposable tube can only be operated with the TC 1 protective housing which is also included in the scope of delivery.
MultiDrive control universal crusher can perform a wide range of crushing tasks involving coarse and fine crushing, thanks to the variety of vessels available. There is a USB interface available for easy actuation and documentation.
High performance : Excellent crushing performance is guaranteed by a combination of variable rotational speeds, ranging from 3000 rpm to 20 000 rpm, and a 1000 Watt output.
Interval operation : The option of interval programming is simple to activate at the press of a button. Interval operation is an asset during the coarse crushing of hard samples or for extra thorough blending.
TFT-display : A clear TFT-display guarantees user-friendly operation.
Weighing function : The weighing function is also integrated into the user-friendly workflow of IKA MultiDrive control. Weighing is performed before crushing using the same mixing vessel, so that no transfer of contents is required.
Variety of vessels (accessories) : MultiDrive offers the right container for every grinding task. For MultiDrive control, milling chambers (MI) for dry grinding, blending vessels (BL) for wet grinding, dispersing vessels (DI) with rotor-stator system as well as autoclavable milling tubes (MT 150) and blending tubes (BT 250) made of plastic are available. The vessels are not included in the scope of delivery.
Toebehoren
Série
FAQ
Heb je vragen over dit product of over deze categorie? Op onze FAQ-sectie geven we je antwoord op veelgestelde vragen!
Bekijk de FAQJe kan onze experts altijd bereiken via info@imlab.eu
Of bel ons direct op +32 (0) 16 73 55 72
(Bereikbaar op werkdagen van 08:00 tot 17:00)
Stel direct je vraag
"*" geeft vereiste velden aan
Vergelijkbare producten
Onze diensten – méér dan een webshop
Bij Imlab koop je niet zomaar een product – je kiest voor een betrouwbare partner met een team dat voor je klaarstaat.
Geen robots, geen callcenter, maar ervaren specialisten die je helpen.
Onze service omvat:
- Kalibratie van je meetapparatuur
- Onsite installatie
- Herstellingen & onderhoud
Hulp nodig of een service aanvragen? We denken graag met je mee en bieden oplossingen op maat, zodat jij snel verder kan.
