Toegevoegd aan je winkelmand!
IKA MultiDrive DI 2000 T Dispersinger with temp. measurement
€1.205,00
Toegevoegd aan je winkelmand!
IKA MultiDrive BT 250.5 Blending tube, autoclavable
€82,50
Toegevoegd aan je winkelmand!
IKA MultiDrive MI 250.2 Star shaped cutter, stainless steel
€172,00
Toegevoegd aan je winkelmand!
IKA MultiDrive BL 2000.1 Standard blend knife
€147,00
Toegevoegd aan je winkelmand!
IKA MultiDrive MI 400.2 Star shaped cutter, stainless steel
€195,00
Toegevoegd aan je winkelmand!
IKA MultiDrive MI 250 T – S
€1.103,00
Toegevoegd aan je winkelmand!
IKA MultiDrive MI 400.1 Standard beater, stainless steel
€111,00
Toegevoegd aan je winkelmand!
IKA MultiDrive MI 400 – S
€1.102,00
Toegevoegd aan je winkelmand!
IKA MultiDrive TC 1 Protective housing
€166,00
Toegevoegd aan je winkelmand!
IKA MultiDrive CS 1
€21,50
Toegevoegd aan je winkelmand!
IKA MultiDrive TS 1 Spare seal with reactivation code
€18,00
Toegevoegd aan je winkelmand!
IKA MultiDrive BL 2000 T Blender vessel
€567,00
Toegevoegd aan je winkelmand!
IKA MultiDrive MI 250.1 Standard beater, stainless steel
€86,50
Toegevoegd aan je winkelmand!
IKA MultiDrive MT 150.5 Milling tube, autoclavable
€77,50
Toegevoegd aan je winkelmand!
IKA MultiDrive MI 250 – S
€967,00
Toegevoegd aan je winkelmand!
IKA MultiDrive MI 400.3 Beater, tungsten carbide
€402,00
Toegevoegd aan je winkelmand!
IKA MultiDrive MI 250.3 Beater, tungsten carbide
€366,00
Toegevoegd aan je winkelmand!
IKA MultiDrive MI 400 T – S
€1.253,00
Toegevoegd aan je winkelmand!
IKA MultiDrive control Maalmolen
€4.557,00
Toegevoegd aan je winkelmand!
IKA MultiDrive control MT Package Maalmolen
€4.465,00
IKA MultiDrive control BT Package Maalmolen
Crushing without cross-contamination
this is possible with the MultiDrive control package including autoclavable disposable tubes BT 250 and the required TC 1 protective housing for dry samples
BT 250 is a disposable tube with a cross-shaped stainless steel beater and flow breakers
The plastic blending tube can be autoclaved
This effectively prevents cross-contamination even if it is used multiple times
An integrated RFID chip simultaneously stores and limits the lifespan of the blending tube
5 spare seals are included in the scope of delivery
By replacing the seal, the service life of the blending tube can be extended
The disposable tube can only be operated with the TC 1 protective housing which is also included in the scope of delivery
MultiDrive universal crusher can perform a wide range of crushing tasks involving coarse and fine crushing, thanks to the variety of vessels available
There is a USB interface available for easy actuation and documentation respectively
High performance: Excellent crushing performance is guaranteed by a combination of variable rotational speeds, ranging from 3000 rpm to 20 000 rpm, and a 1000 Watt output
Interval operation: The option of interval programming is simple to activate at the press of a button
Interval operation is an asset during the coarse: crushing of hard samples or for extra thorough blending
Integrated cooling
A cooling system is integrated in the milling cup, which allows indirect heat dissipation
Thus, coolant and sample remain separate
TFT-display: A clear TFT-display guarantees user-friendly operation
Temperature measurement
MultiDrive control offers temperature measurement and vessel: recognition using RFID
A temperature limit can be set for temperature-sensitive materials, or for specific planned reactions to protect against overheating
Weighing function: The weighing function is also integrated into the user-friendly
Workflow of the IKA MultiDrive control: Weighing is performed before crushing using the same mixing cup, so that no transfer of contents is required
| Process type | batch |
| Operating principle | cutting/impact/blending/dispersing |
| Motor rating input [W] | 1000 |
| Motor rating output [W] | 800 |
| Speed range [rpm] | 3000 - 20000 |
| Speed deviation [%] | ±5 |
| Power-ON time [min] | 5 |
| Power-OFF time [min] | 10 |
| Motor principle | Brushless DC |
| Display | TFT |
| RFID reader/writer unit | yes |
| Temperature display | yes |
| Temperature measurement resolution [K] | 0.1 |
| Accuracy of temperature measurement [K] | ±1 |
| Temperature limit min. [°C] | -50 |
| Temperature limit max. [°C] | 120 |
| Monitoring maintain time | yes |
| Weighing function | yes |
| Weighing range [g] | 5 - 4000 |
| Weighing resolution [g] | 1 |
| Load capacity weighing function max. [kg] | 4 |
| Weighing accuracy | ±(0.3%+2) g |
| Vessels detection | yes |
| Ramp programming | yes |
| Dimensions (W x H x D) [mm] | 300 x 350 x 250 |
| Weight [kg] | 8.5 |
| Permissible ambient temperature [°C] | 5 - 40 |
| Permissible relative humidity [%] | 80 |
| Protection class according to DIN EN 60529 | IP 31 |
| USB interface | yes |
| Bluetooth interface | yes |
| Voltage [V] | 220 - 240 |
| Frequency [Hz] | 50/60 |
| Power input [W] | 1000 |
Crushing without cross-contamination
this is possible with the MultiDrive control package including autoclavable disposable tubes BT 250 and the required TC 1 protective housing for dry samples
BT 250 is a disposable tube with a cross-shaped stainless steel beater and flow breakers
The plastic blending tube can be autoclaved
This effectively prevents cross-contamination even if it is used multiple times
An integrated RFID chip simultaneously stores and limits the lifespan of the blending tube
5 spare seals are included in the scope of delivery
By replacing the seal, the service life of the blending tube can be extended
The disposable tube can only be operated with the TC 1 protective housing which is also included in the scope of delivery
MultiDrive universal crusher can perform a wide range of crushing tasks involving coarse and fine crushing, thanks to the variety of vessels available
There is a USB interface available for easy actuation and documentation respectively
High performance: Excellent crushing performance is guaranteed by a combination of variable rotational speeds, ranging from 3000 rpm to 20 000 rpm, and a 1000 Watt output
Interval operation: The option of interval programming is simple to activate at the press of a button
Interval operation is an asset during the coarse: crushing of hard samples or for extra thorough blending
Integrated cooling
A cooling system is integrated in the milling cup, which allows indirect heat dissipation
Thus, coolant and sample remain separate
TFT-display: A clear TFT-display guarantees user-friendly operation
Temperature measurement
MultiDrive control offers temperature measurement and vessel: recognition using RFID
A temperature limit can be set for temperature-sensitive materials, or for specific planned reactions to protect against overheating
Weighing function: The weighing function is also integrated into the user-friendly
Workflow of the IKA MultiDrive control: Weighing is performed before crushing using the same mixing cup, so that no transfer of contents is required
Toebehoren
Serie
FAQ
Heb je vragen over dit product of over deze categorie? Op onze FAQ-sectie geven we je antwoord op veelgestelde vragen!
Bekijk de FAQJe kan onze experts altijd bereiken via info@imlab.eu
Of bel ons direct op +32 (0) 16 73 55 72
(Bereikbaar op werkdagen van 08:00 tot 17:00)
Stel direct je vraag
"*" geeft vereiste velden aan
Vergelijkbare producten
Onze diensten – méér dan een webshop
Bij Imlab koop je niet zomaar een product – je kiest voor een betrouwbare partner met een team dat voor je klaarstaat.
Geen robots, geen callcenter, maar ervaren specialisten die je helpen.
Onze service omvat:
- Kalibratie van je meetapparatuur
- Onsite installatie
- Herstellingen & onderhoud
Hulp nodig of een service aanvragen? We denken graag met je mee en bieden oplossingen op maat, zodat jij snel verder kan.
