Toegevoegd aan je winkelmand!
IKA Labworldsoft® 6 Advanced
€9.528,00
Toegevoegd aan je winkelmand!
IKA VSE 1 Condenser
€616,00
Toegevoegd aan je winkelmand!
IKA Y hose connector 8 mm
€7,20
Toegevoegd aan je winkelmand!
IKA Labworldsoft® 6 Pro
€12.478,00
Toegevoegd aan je winkelmand!
IKA VH.SI.8 Vacuum hose
€49,00
Toegevoegd aan je winkelmand!
IKA Labworldsoft® 6 Starter
€5.469,00
Toegevoegd aan je winkelmand!
IKA LR-2.ST the High-Performer High Viscosity Reactor
€16.773,00
IKA VACSTAR control Chemische membraanpomp
Separation, filtration, removal: The VACSTAR dry 4-chamber membrane vacuum pump is powerful, resistant to chemicals and low-maintenance
VACSTAR control is the ideal system with its integrated vacuum controller and removable display
The controller offers a suitable mode for the desired process: from automatic to manual operation, right through to pumping or an evacuation and cleaning function
High-performance suction: VACSTAR has an excellent suction performance, with its 22 l/min at a minimum of 2 mbar
Integrated vacuum controller with removable controller (WiCo)
Depending on the application, you can easily select your operating mode either by using the intuitive operator menu or by remote control
For additional safety for users and environment, we recommend using the VSE 1 vacuum safety emission condenser, which prevents solvents from being released into the room air
The VSE 1 is available as accessory
| Pump rate max. (50/60Hz) [m³/h] | 1.32 |
| Pump rate max. (50/60Hz) [l/min] | 22 |
| Final pressure without gas ballast [mbar] | 2 |
| Suction levels | 4 |
| Cylinder | 4 |
| Connection diameter suction side [mm] | 8 |
| Connection diameter pressure side [mm] | 8 |
| Gas ballast valve | no |
| Input pressure [mbar] | 2 - 1030 |
| Boiling point detection | yes |
| Solvent library | yes |
| Analog speed vacuum control | yes |
| Speed adjustment | Turning knob |
| Speed range [rpm] | 285 - 1200 |
| Display | TFT |
| Pressure unit / scale | mbar, hPa, mmHg, Torr |
| Vacuum sensor | yes |
| Vacuum sensor type | ceramic Al2O3 |
| Pressure max. for pressure sensor [bar] | 1.2 |
| Measurement range (absolute) [mbar] | 1 - 1030 |
| Control range [mbar] | 1 - 1030 |
| Resolution pressure [mbar] | 1 |
| Measurement uncertainty [mbar] | 1 |
| Vacuum valve | no |
| Venting valve | yes |
| Condensate trap | yes |
| Emission condenser | yes |
| Timer | yes |
| Noise at low. pressure [dB(A)] | 54 |
| Material in contact with medium | Al2O3, PTFE, FPM, PPS |
| Housing material | alu-cast coating / thermoplastic polymer |
| Clean room qualified | no |
| Explosion proofed | no |
| Mode automatic | yes |
| Mode manual | yes |
| Mode pump % | yes |
| Mode program | yes |
| Dimensions (W x H x D) [mm] | 270 x 435 x 500 |
| Weight [kg] | 14 |
| Permissible ambient temperature [°C] | 5 - 40 |
| Permissible relative humidity | 80% (up to 31°C), decreasing linearly to max. 50 (@40°C) |
| Protection class according to DIN EN 60529 | IP 20 |
| RS 232 interface | yes |
| USB interface | yes |
| Voltage [V] | 100 - 240 |
| Frequency [Hz] | 50/60 |
| Power input [W] | 140 |
| Power input standby [W] | 1.5 |
Separation, filtration, removal: The VACSTAR dry 4-chamber membrane vacuum pump is powerful, resistant to chemicals and low-maintenance
VACSTAR control is the ideal system with its integrated vacuum controller and removable display
The controller offers a suitable mode for the desired process: from automatic to manual operation, right through to pumping or an evacuation and cleaning function
High-performance suction: VACSTAR has an excellent suction performance, with its 22 l/min at a minimum of 2 mbar
Integrated vacuum controller with removable controller (WiCo)
Depending on the application, you can easily select your operating mode either by using the intuitive operator menu or by remote control
For additional safety for users and environment, we recommend using the VSE 1 vacuum safety emission condenser, which prevents solvents from being released into the room air
The VSE 1 is available as accessory
Toebehoren
FAQ
Heb je vragen over dit product of over deze categorie? Op onze FAQ-sectie geven we je antwoord op veelgestelde vragen!
Bekijk de FAQJe kan onze experts altijd bereiken via info@imlab.eu
Of bel ons direct op +32 (0) 16 73 55 72
(Bereikbaar op werkdagen van 08:00 tot 17:00)
Stel direct je vraag
"*" geeft vereiste velden aan
Vergelijkbare producten
Onze diensten – méér dan een webshop
Bij Imlab koop je niet zomaar een product – je kiest voor een betrouwbare partner met een team dat voor je klaarstaat.
Geen robots, geen callcenter, maar ervaren specialisten die je helpen.
Onze service omvat:
- Kalibratie van je meetapparatuur
- Onsite installatie
- Herstellingen & onderhoud
Hulp nodig of een service aanvragen? We denken graag met je mee en bieden oplossingen op maat, zodat jij snel verder kan.
