Volume range (H2O) [l] | 0.01 - 1.5 |
Stator diameter [mm] | 18 |
Rotor diameter [mm] | 13.4 |
Gap between rotor and stator [mm] | 0.25 |
allowable Speed max. [rpm] | 25000 |
Circumferential speed max. [m/s] | 17.5 |
Immersion depth [mm] | 40 - 185 |
Shaft length [mm] | 194 |
Material in contact with medium | AISI 316L, PTFE, ceramic |
pH range | 2 - 13 |
Suitable for solvents | no |
Suitable for abrasive substances | no |
Working temperature max. [°C] | 150 |
Sterilization methods | wet chemical |
Vacuum [mbar] | 50 |
Ultimate fineness, suspensions [µm] | 10 - 50 |
Ultimate fineness, emulsions [µm] | 1 - 10 |
S 25 KD - 18 G ST Dispersing tool
S 25 KD - 18 G ST Dispersing tool
Dispersing tool for the dispersers T 25 digital, T 25 easy clean digital/control
Type of sealing and bearing: Ball-bearing with PTFE sealing and FFKM O-ring
Product-touching material: AISL 316L, PTFE, FFKM
Suitable for solvents: Yes
Sterilizable: all methods (except ball bearing)
Suitable for vacuum: Yes
Max. working temperature [°C]: 150
Shaft length [mm]: 194
Diameter stator/rotor [mm]: 18/13.4
Gap between [mm]: 0.25
Recommend emersion depth [mm]: 40 - 185
Recommend working range [ml]: 10 - 1,500
- Nog vragen over Ika S 25 KD - 18 G ST Dispersing tool Dispersing elements? Contacteer ons!
Downloads
Bijlage | Grootte |
---|---|
Datasheet-EN-S25KD-18G-ST-Ika-Imlab | 404.2 KB |
Manual-EN-FR-S25KD-18G-ST-Ika-Imlab | 1021.38 KB |
Brochure-EN-Ultra-Turrax-Dispersers-Ika-Imlab | 941.11 KB |
Pricelist-Ultra-Turrax-T10-T18-T25-T50-T65D-IKA-Imlab | 200.08 KB |
Stels ons uw vragen over Ika S 25 KD - 18 G ST Dispersing tool Dispersing elements
Aarzel niet om ons op te bellen op +32 (0)16 73 55 72 of vul het contactformulier hieronder in en wij contacteren u zo snel mogelijk